Testing the lan path to your router, Testing the lan path to your router -5 – NETGEAR WPNT834 User Manual

Page 76

Advertising
background image

Reference Manual for the RangeMax 240 Wireless Router WPNT834

Troubleshooting

7-5

v1.0, November 2005

Inform your ISP that you have bought a new network device, and ask them to use the router’s
MAC address.

OR

Configure your router to spoof your computer’s MAC address. This can be done in the Basic
Settings menu. For more information, see

“How to Bypass the Configuration Assistant” on

page 3-8

.

If your router can obtain an IP address, but your computer is unable to load any Web pages from
the Internet:

Your computer may not recognize any DNS server addresses.

A DNS server is a host on the Internet that translates Internet names (such as www addresses)
to numeric IP addresses. Typically your ISP will provide the addresses of one or two DNS
servers for your use. If you entered a DNS address during the router’s configuration, reboot
your computer and verify the DNS address as described in

“Preparing a Computer for

Network Access” in Appendix B

. Alternatively, you may configure your computer manually

with DNS addresses, as explained in your operating system documentation.

Your computer may not have the router configured as its TCP/IP gateway.

If your computer obtains its information from the router by DHCP, reboot the computer and
verify the gateway address as described in

“Preparing a Computer for Network Access” in

Appendix B

.

Troubleshooting a TCP/IP Network Using a Ping Utility

Most TCP/IP terminal devices and routers contain a ping utility that sends an echo request packet
to the designated device. The device then responds with an echo reply. Troubleshooting a TCP/IP
network is made very easy by using the ping utility in your computer or workstation.

Testing the LAN Path to Your Router

You can ping the router from your computer to verify that the LAN path to your router is set up
correctly.

To ping the router from a running Windows 95 or later:

1. From the Windows toolbar, click on the Start button and select Run.

2. In the field provided, type Ping followed by the IP address of the router, as in this example:

ping 192.168.1.1

Advertising