Viewing a list of attached devices, Configuration file management, Viewing a list of attached devices -5 – NETGEAR WPNT834 User Manual
Page 66: Configuration file management -5
Reference Manual for the RangeMax 240 Wireless Router WPNT834
Maintenance
6-5
v1.0, November 2005
Viewing a List of Attached Devices
The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the main menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown below.
For each device, the table shows the IP address, NetBIOS Host Name or Device Name (if
available), and Ethernet MAC address. To force the router to look for attached devices, click the
Refresh button.
Configuration File Management
The configuration settings of the WPNT834 router are stored within the router in a configuration
file. This file can be saved (backed up) to a user’s PC, retrieved (restored) from the user’s PC, or
cleared to factory default settings.
Figure 6-4
Note: If the router is rebooted, the table data is lost until the router rediscovers the
devices.