Appendix a technical specifications – NETGEAR GA311 User Manual
Page 37
A-1
v1.0, February 2007
Appendix A
Technical Specifications
This appendix provides technical specifications for the NETGEAR 10/100/1000 Mbps Gigabit
Ethernet Adapter GA311.
Cable Specifications GA311 (10/100/1000BASE-T)
•
Port type: 10/100/1000BASE-T
•
Connector: RJ-45
•
Media: CAT 5 UTP/CAT 5e UTP
•
Maximum Distance: 325 feet (100 meters)
Note: .
Note: 1000BASE-T signaling requires four twisted pairs of Category 5 balanced cabling,
as specified in ISO/IEC 11801:1995 and ANSI/EIA/TIA-568-A (1995) and tested
for additional performance using testing procedures defined in TIA/EIA TSB95
Standards Compatibility
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u Auto Negotiation
IEEE 802.1Q VLAN
GA311Network Connection
RJ-45 connector for Category 5 UTP cable
Full-duplex 2000 Mbps (1000 Mbps each way) Gigabit Ethernet
Host Connection
64 bit, 66/33 MHz PCI slot
32-bit, 33 MHz PCI slot
PCI rev 2.2 or higher
DC Operating Voltage
+5V +/- 5%
Power Consumption
4.75 watts, maximum
Dimensions
5.53 x 2.30 in. (14.04 x 5.84 cm)
Weight
2.2 oz. (60 g)
Operating Temperature
0º to 55º C