NETGEAR GA311 - Manual (Page 41)

NETGEAR 10/100/1000 Mbps Gigabit Ethernet Adapter GA311 User Manual
B-3
v1.0, February 2007
Install the driver for the NETGEAR 10/100/1000
Mbps Gigabit Ethernet Adapter GA311.
a. Click Search for the best driver in these
locations, clear the Search removable
media (floppy, CD-ROM...) check box
and select Include this location in the
search. Type D:\ in the drop-down box.
Click Next.
Note: Windows XP drivers are found at
D:\ assuming that D:\ is the drive letter
for the CD-ROM drive).
b. The driver is copied onto your system,
and XP will probably ask for the original
Windows XP CD-ROM. Point Windows
XP to the proper location (for example,
D:\i386)
c. The Completing the Found New
Hardware Wizard dialog box appears
with the following adaptor name: GA311
Gigabit Ethernet Adapter. Click Finish.
d. Remove the GA311 driver CD from the
CD-ROM drive. The GA311 Windows
XP driver installation is complete.
You should see the Local Area
Connection icon on the right in the lower
right portion of the Windows task bar.
Search and Installation Options
Local Area Connection Icon before you connect a
network cable