NETGEAR GA311 - Manual (Page 44)

NETGEAR 10/100/1000 Mbps Gigabit Ethernet Adapter GA311 User Manual
B-6
v1.0, February 2007
Install the driver for the NETGEAR 10/100/1000
Mbps Gigabit Ethernet Adapter GA311.
a. The Locate Driver Files dialog box
appears.
b. Select Specify a location. Click Next.
c. Insert the GA311 driver CD into your
CD-ROM drive. In the Copy
manufacturers files from field, type D:\
and click OK.
Note: Windows drivers are found at D:\,
assuming that D: is the drive letter for
the CD-ROM drive.
d. The Driver File Search Results dialog
box appears. Click Next.
e. The Completing the Found New
Hardware Wizard dialog box appears
with the following adapter name:
NETGEAR 10/100/1000 Mbps Gigabit
Ethernet Adapter GA311. Click Finish.
f. Remove the GA311 driver CD from the
CD-ROM drive. The GA311 Windows
driver installation is complete.
You should see the Local Area
Connection icon on the right in the lower
right portion of the Windows task bar.
Locate Driver Files
Note: If Windows warns about a Digital
Signature Not Found, click Yes to continue.
Local Area Connection Icon before you connect a
network cable