Niles Audio DMS4 User Manual
Page 11
11
www.nilesaudio.com
ä
OPTIONS key
Press this key on any library screen to view a list of available
options. If pressing this key has no effect, then there are no
options available on the current screen.
p
MARK key
This key is used in the Audio Library to select multiple items
and then perform an action on them collectively. For more
information about using the mark function refer to page 22.
NUMERIC (0 to 9) keys
The numeric keys can be used as follows:
In the library you may jump to an item in the list that begins
with one of the letters specified at the top of each key
In text entry mode these keys can be used as an
alphanumeric key pad (similar to a mobile phone)
R
REPEAT (RETURN) key
The Repeat key has the following functions:
During playback this key toggles the repeat play setting on
the DMS4 Digital Music Server
In text entry mode this key can be used to perform a
carriage return
Q
SHUFFLE (DELETE) key
The Shuffle key has the following functions:
During playback this key toggles the random play setting
on the DMS4 Digital Music Server
In text entry mode this key can be used to delete characters
g
STOP key
During playback the Stop key halts playback on the currently
selected output of the DMS4 Digital Music Server.
a
PLAY key
The Play key can be used to resume playback on the currently
selected output of the DMS4 Digital Music Server.
N
OUTPUT key
Press this key to change the currently selected audio output.
c e
key
When this key is pressed briefly during playback, play restarts
at the beginning of the next track. When the key is held for a
longer period of time the music will fast forward at high speed.
d f
key
When this key is pressed briefly during playback, play restarts at
the beginning of the current track. A second brief press moves
to the beginning of the previous track. When the key is held for
a longer period of time the music will rewind at high speed.
h
PAUSE key
Press the pause key to interrupt playback temporarily.
•
•
•
•
•
•
swITCHING ON aNd OFF
Your DMS4 Digital Music Server is designed to remain switched
on continuously. However, if you are not planning to use your
DMS4 Digital Music Server for an extended period of time, you
may want to switch it off.
To switch off, press the STANDBY button on the front panel
of your DMS4 Digital Music Server. Next, press the action
button labelled Yes below the LCD display. After a brief
period, the unit will switch off and the Standby LED will
glow red
To switch back on, press the STANDBY button on the front
panel of your DMS4 Digital Music Server again. After a
brief period, the unit will switch on, the Standby LED will
glow green and the TV will display the Audio Library
screen
If you are not using your DMS4 Digital Music Server for a brief
period, you may want to switch it to Standby mode.
Press the ;Standby key on your DMS4 Digital Music
Server remote control. The TV screen will display the
Standby screen
Press the ;Standby key again to leave Standby mode
and return to normal operation
CONFIGuRING YOuR REmOTE TO
CONTROl OTHER dEvICEs
The TV and Amp keys on the remote control may be individually
configured to control a range of televisions and amplifiers from
well known manufacturers.
To configure the remote to control your television
Press the TV and OSelect keys simultaneously; hold them
down for 1 second
The TV key will remain lit for 20 seconds; the configuration
process must be completed during this time.
Enter the 3 digit numeric code matching the manufacturer
of your television from the list in Appendix A
Press the TV button again
The TV key will blink twice to indicate that the configuration has
been accepted. If the TV key does not blink begin the process
again, taking care to enter the number exactly as printed in
the list. If the television is switched on during the configuration
process, entering the correct code will cause the television to go
into standby.
To configure the remote to control your amplifier, follow the
above procedure, pressing the AMP key in place of the TV key,
and using the appropriate numeric code for your amplifier.
•
•
•
•
•
•
•