National Instruments NI-488TM - Manual (Page 11)

© National Instruments Corporation 11 PCI/PXI Ethernet Adapter Installation Guide
• Update your BIOS. Sometimes updating the BIOS will correct some
configuration problems.
• Configure the PCI/PXI slot for level-triggered interrupts instead of
edge-triggered interrupts in BIOS.
Removing an Existing Adapter in Windows 95
If you are replacing an existing Ethernet adapter with the PCI/PXI Ethernet
adapter, follow these steps before physically removing the adapter card.
1. Right-click My Computer.
2. Select Properties.
3. Click the Device Manager tab.
4. Double-click Network Adapters.
5. Select the adapter and click Remove.
6. Click OK.
7. Follow the instructions in the section Installing Your PCI Board or
Installing Your PXI Board .