Windows nt version 3.51 – National Instruments NI-488TM User Manual
Page 7
© National Instruments Corporation
7
PCI/PXI Ethernet Adapter Installation Guide
6.
Specify the appropriate drive in the dialog box and click OK. Follow
the prompts to complete the installation.
7.
Click Close to finish.
8.
Restart Windows NT.
Windows NT Version 3.51
1.
After you install the Ethernet adapter, power on the computer and start
Windows NT.
2.
Double-click the Network icon in the Control Panel.
3.
Click Add Adapter.
4.
When the list of adapters appears, scroll to the end of the list and select
<Other> Requires disk from manufacturer and then click
Continue.
5.
Insert the PCI/PXI Ethernet Adapters CD in the appropriate drive,
specify that drive, and click OK.
6.
Select the Intel PRO Adapter and click OK.
7.
The TCP/IP Configuration dialog box appears. Enter the appropriate
information and click OK.
8.
When prompted, restart Windows NT.