NETGEAR EXPRESS EVA9100 - Manual (Page 82)

Digital Entertainer Express EVA9100 User Manual
Maintenance and Troubleshooting 6-11
v1.0, October 2009
Using Ping
To use ping:
1. From the Windows taskbar, click the Start button, and select Run.
2. In the field provided, type ping followed by the IP address of the Digital Entertainer Express.
Displaying the IP address is described in “IP Address” on page 6-10 . For example, type:
ping 192.168.0.2
3. Click OK. You should see a message like this one:
pinging <IP address> with 32 bytes of data
If the path is working, you see this message:
reply from < IP address >: bytes=32 time=NN ms TTL=xxx
If the path is not working, you see this message:
request timed out
If you cannot ping the Digital Entertainer Express, then your network might not be working
correctly.