Configuring the np5410, The info tab – NetComm NP5410 User Manual
Page 15
Rev. 1 - YML675
www.netcomm.com.au
NP5410 Wireless Ethernet Bridge User Guide
Page 15
Configuring the NP5410
The Info Tab
State:
Displays disconnected or associated connection status.
Wireless network name:
(SSID) Displays current SSID of the NP5410.
If the NP5410 found no AP or any other ad-hoc device,
then SSID will show “non-spec”. Please make sure that
your wireless LAN is working properly under the
effective reach range of the NP5410
Channel:
Displays the channel that the NP5410 is currently
using.
Transmission Rate:
The transfer data rate that the NP5410 is using in
wireless LAN
Communications Strength:
Displays the percentage of wireless LAN connection
integrity when connected to an AP.
BSSID:
Displays MAC address of the AP that the NP5410 is
connecting with.
WEP:
WEP status set in the bridge.
Adapter Name:
Displays the name of this Ethernet Adapter (Adapter).