NetComm NP5410 - Manual (Page 6)

www.netcomm.com.au Rev. 1 - YML675
Page 6 NP5410 Wireless Ethernet Bridge User Guide
Factory Defaults
The following table lists the Factory Defaults of your NP5410 Wireless Ethernet Bridge:
Field Setting Details
IP address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Channel: 1
Wireless Network Name (SSID): wireless
User Name: admin
Password: admin
Note: These defaults may change with firmware updates and factory changes, please
consult the NetComm website to check for the latest defaults.