Nextel comm I700PLUS NTN9368-A - Manual (Page 111)

Accessories
103
Adding and Removing a Battery from the Rear Pocket
NOTE: If a battery is in the rear pocket and the i700plus phone with a
battery is inserted into the front pocket, the battery in the front
pocket will charge to full capacity before the battery in the rear
pocket is charged. The LED for the rear pocket flashes yellow,
indicating that its battery is waiting to be charged. To remove
the battery from the rear pocket, hold the base of the charger
and pull the battery forward then straight up.
1 Insert the power supply’s DC jack plug into the DC jack recepta-
cle on the back of the charger.
NOTE: Use only with the Motorola rapid charger included with
your Desktop Charger package.
2 Plug the power supply end of the power-supply cord into any
standard AC outlet. The charger performs a quick power-up self-
test. The LED indicators will flash once to indicate a successful
power-up.
3 Attach a battery to your i700plus phone.
4 Place the accessory and data cable connector on your i 700plus
phone into the pin connector located in the charger’s front
pocket.
1 Insert the battery with the Motorola label facing forward and the
(+) and (-) symbols pointing downward.
2 To remove the battery, pull it forward, then up and out of the
charger.
1
1
2
INSERT REMOVE
NextelUG_i700.fm Page 103 Friday, June 16, 2000 3:15 PM