Nextel comm I700PLUS NTN9368-A - Manual (Page 96)

88
www.nextel.com
Setting the Time and Date
IMPORTANT: The Time and Date may not be
available in your area and may not appear on your
display. Once this feature becomes available, your
i700plus phone will automatically display the local
time and date.
You have a choice of a 12- or a 24-hour clock format, as shown in the
table below:
You have a choice of either a MM/DD (month/day) or a DD/MM (day/
month) date format as shown in the table below.
All of the modes (Phone, Private, Group, Net) display the time and
date on the third line of the display. To set the time and date format once
this feature is activated, follow the steps below:
12-Hour Display 12:00 am 6:25 am 12:00 pm 10:25 pm
24-Hour Display 00:00 06:25 12:00 22:25
Date
Month/Day Format
(MM/DD)
Day/Month Format
(DD/MM)
January 2nd 01/02 02/01
December 31st 12/31 31/12
1 Press * then # then 7 then 1.
2 Press P under “OK”. The Time/Date Display screen appears.
The default (preset) time and date format is “On”. However, the
time and date does not display until the Nextel National Network
activates this feature. You may turn “off” this feature at this
point.
3 Press Q until you see the Time Format: screen.
s f b
Phone Ready
Nextel
Name Mail
NextelUG_i700.fm Page 88 Friday, June 16, 2000 3:15 PM