Nextel comm I700PLUS NTN9368-A - Manual (Page 73)

Nextel Direct Connect®
65
Receiving/Responding to a Call Alert
When you receive an alert, your phone will automatically change to
Private mode. It will also chirp and you will see the name or the
number (if you have not stored the individual in a list) of the caller.
NOTE: Call alert allows you to contact another Nextel Direct Connect
subscriber at no cost, avoiding airtime charges.
NOTE: Until you answer, clear or queue the call alert, you will not
receive any additional Phone, Private, or Group calls.
Call Alert Queuing
Call alert queuing is a feature that allows you to save up to eight call
alerts in a queue or list.
Placing/Clearing a Call Alert in the Queue
When you receive a call alert, you can either clear the call alert or save it
to the list for later recall.
NOTE: If you receive multiple call alerts, the last received call alert
displays and the remaining call alerts are stacked at the begin-
ning of the queue.
Responding to a Call Alert within the Queue
You can respond to the call alerts in any order. To select a call alert for
response:
1 Press and hold the Push-To-Talk button to answer the call alert.
2 Press P under “Clear”, or any key, to clear the call alert.
To clear a call alert, press P under “Clear”.
To place a call alert in the queue, press P under “Queue” or
N.
1 Press P under “Queue”.
2 Press Q to scroll to the desired call alert.
3 Press and hold the Push-To-Talk button to answer the call alert.
After you respond to the alert, it is removed from the queue.
NextelUG_i700.fm Page 65 Friday, June 16, 2000 3:15 PM