National Instruments NI-488.2 - Manual (Page 131)

Index
© National Instruments Corporation I-3 NI-488.2 User Manual
EOI (end or identify) line (table), A-4
EOIP error code, C-6
EOS
EOS comparison method, 8-1
EOS read method, 8-2
EOS write method, 8-2
EPWR error code, C-11
ERR status word condition, 4-7, B-1, B-2
error codes, debugging applications, 5-1
error codes and solutions
EABO, C-5
EADR, C-4
EARG, C-4
EARM, C-9
EBUS, C-8
ECAP, C-7
ECIC, C-3
EDVR, C-2
EFSO, C-7
EHDL, C-10
ELCK, C-9
ENEB, C-6
ENOL, C-3
EOIP, C-6
EPWR, C-11
ERST, C-11
ESAC, C-5
ESRQ, C-8
ETAB, C-9
EWIP, C-10
GPIB error codes (table), C-1
error conditions
communication errors
repeat addressing, 5-3
termination method, 5-3
configuration errors, 5-2
Interactive Control utility, 7-11
timing errors, 5-2
error function (Iberr), 4-8
error tracking with NI Spy, 6-2
error type reporting, 4-8
ERST error code, C-11
ESAC error code, C-5
ESRQ error code, C-8
ETAB error code, C-9
Ethernet Device Configuration
utility, 2-13, 3-9
Event Status bit (ESB), 8-13
EWIP error code, C-10
examples (NI resources), E-1
execute function n times (n *) function,
Interactive Control utility, 7-10
execute indirect file ($) function, Interactive
Control utility, 7-10
execute previous function n times (n * !)
function, Interactive Control utility, 7-10
exit or quit (q) function, Interactive Control
utility, 7-10
F
FindLstn function, 4-12
FindRQS function
finding first device requesting
service, 8-16
frequently asked questions, D-1
functions. See global functions.
G
global functions
debugging applications, 5-1
error function (Iberr), 4-8
global variables
status word (Ibsta), 4-7
writing multithreaded NI-488.2
applications, 8-9
GPIB
configuration
controlling more than one
interface, 1-2