NorthStar Navigation 8000I - Manual (Page 24)

24 Northstar 8000i Black Box Processor
Location Guide
Locate the keypad relative to the screen it is controlling. The keypad does not require
external power
Mounting
Select an area that has easy access in order to control the 8000i. Make sure the panel it is
being mounted into is flat, to ensure a watertight seal
6.10 Northstar 8000i Video Interface
USB Video capture device NS004745
Description
Video to USB converter
Functionality
Interfaces composite or S-Video feeds to a 8000i processor. Composite or S-Video can be
from a security camera or a an entertainment source. It is converted to a USB feed which
connects to a 8000i possessor or USB hub. The feed is then displayed on the 8000i processor
it is connected to. The video is not networked. It is only visible on the local processor. The
device can use NTSC PAL or SECAM. Select which source you use from with in the 8000i
software.
NOTE: Only one video capture device can be used per processor
Other parts required
Third party video feed. If using audio; connect the audio feed of the device to NS004802
audio cable which then connects to the Aux connector of the processor
Location Guide
Connect to a 8000i processor. Don't use a USB cable longer than 16.5 ft (5 m). Pay special
attention to the video and audio cable runs. Refer to wiring guide (see "Wiring Guidelines"
page 34)
6.11 Northstar 8000i C-MAP Chart License Key
C-Map Chart License Key
Description
C-Map Chart License Key
Functionality
Holds the license information of the purchased charts.