NorthStar Navigation 8000I User Manual

Page 53

Advertising
background image

53

Northstar 8000i Black Box Processor

Before crimp

After crimp

A

Crimp tool. The crimp tools jaw presses the gold plated contacts down so they pierce
through the insulation of all eight wires to make contact with the copper conductor

B Network

cable

C

Make sure sheath is pushed well inside the connector

14. Cut any spare shield wire close to the plug
16. Slide the gasket, body and locking nut over the RJ45 connector slide
17. Slide the sealing nut and seal towards the body and screw together.

Advertising