3 utility port, 1 external wake up and remote power on – NorthStar Navigation 8000I User Manual
Page 38
38
Northstar 8000i Black Box Processor
8.3
Utility Port
Connect to other electronic devices using the the optional Northstar 8000i Utility cable
(NS004801). The Utility cable has the following communication capabilities.
•
1 x NMEA Receive (see "NMEA" page 41)
•
1 x NMEA Transmit
•
External Alarm (see "External Alarm" page 43)
•
Remote Power On
•
External Wake Up (see "External Alarm" page 43)
•
System Controller re program (Service only)
NS004801 Utility Cable
Utility connector Pinout viewed looking at connector
Pin
Color
Signal
3 Yellow
NMEA
RX
+
6 Black/White
NMEA
RX
-
5
White
NMEA TX +
4
Black
NMEA TX - (Ground)
7
Orange
NavBus + (Future)
8
Blue
NavBus - (Future)
9
Dark Green
External Alarm
11
Gray
External Wake Up
12
Light Green
Remote Power On
1
Purple
System Controller (re program TX Service Only)
2
Pink
System Controller (re program RX Service Only)
10
Brown/White
System Controller (reset Service Only)
8.3.1
External Wake Up and Remote Power On
External Wake Up sends a signal to another device to initiate Power On. Connect External
Wake to the Remote Power On of the other device.
The External Wake Up feature of the 8000i provides the ability for an 8000i Device to control
the power state of another 8000i device that it is attached to.