NorthStar Navigation 8000I - Manual (Page 79)

79 Northstar 8000i Black Box Processor
10.17.7 Resize an instrument
You can use this to change the size of an instrument displayed on an instrument panel. The
instrument can be set to small, medium, or large.
The default size is medium.
To resize an instrument:
1. Select Display then select Instruments . If you can't see the Select Panel button,
select Return .
2. Choose Select Panel then select the instrument panel that you want to change
and select Return .
3. Select Config from the control panel then select the instrument to be resized.
4. The Resize Instrument button shows the current setting. Select the button if you
want to change the setting and a drop down list of choices appears.
5. Select the new setting then select Save Changes to confirm.
6. The new setting is applied immediately and stays until you change it again.
7. When you are finished, select
Return .
10.17.8 Delete an instrument
Use this to delete an instrument from an instrument panel. (The data from that instrument
continues to be received by the 8000i network but is no longer shown.)
To delete an instrument:
1. Select Display , then select Instruments . If you can't see the Select Panel button,
select Return .
2. Choose Select Panel, then select the instrument panel that you want to change
and select Return .
3. Select Config , then select the instrument that you want to delete.
4. Select Delete Instrument . The instrument is immediately deleted off the
instrument panel.
5. Select Save Changes to confirm the deletion. When you are finished, select
Return .