Nortel Networks ATA 2 - Manual (Page 10)

Feature List
Business Communications Manager ATA 2 User Guide P0941629 Issue 05
Priority Call
ы¥б
Allows you to interrupt an internal call in progress on a digital telephone, or make
a voice call to a digital telephone on Voice Call Deny or Do Not Disturb. The
session in progress is automatically put on hold.
Note: Priority Call must be enabled in Business Communications Manager
System Administration.
Privacy Control
ы¥¡Ь
Prevents another telephone that shares your line from joining your current call or
permits another telephone that shares your line to join in.
Restriction Override
ы¥Я¡ <plus an override password> <plus the restricted number>
Allows you to override restrictions imposed on your telephone.
Ring Again
ы¥Ы
Allows you to queue a call to another Business Communications Manager or
Centrex telephone that is busy or is not answered or to a busy line in the Line Pool.
You can use ring again only on calls placed on an intercom line. When the telephone
is available, you are alerted with one short ring from your telephone.
To cancel ring again, press
ы£Ы.
Reply To a Ring Again Signal
To connect with a ring again request when you are on a call (or your telephone is
off-hook):
1. Press
ûÛ. This automatically places your call on hold.
2. To return to the caller on hold, press
ûÛ.
To connect with a ring again request when your telephone is on-hook:
1. Lift the handset. The ring again number is automatically redialed.
Note: If you do not respond to a ring again signal within 30 seconds, ring
again is canceled.