Nortel Networks ATA 2 - Manual (Page 11)

Feature List
P0941629 Issue 05 Business Communications Manager ATA 2 User Guide
Saved Number Redial
ы¥Яа
Allows you to save an external number while you are on a call or while the called
telephone is ringing. To automatically redial the saved number:
1. Press
ы¥а.
Send Message
ы¥Ъ
Allows you to leave a message on a co-worker’s telephone.
To cancel send message, press
ы£Ъ.
Service Mode
In service mode the ATA 2 telephone can be assigned as the control telephone for
one or more lines, or as the night zero telephone. Service mode is assigned during
Business Communications Manager System Administration.
System Speed Dial
ы¥в <plus the speed dial code>
Allows you to use a speed dial code to quickly dial preprogrammed telephone
numbers. System speed dial codes are established by the System Administrator.
Note: You cannot program personal speed dial numbers from your telephone.
Tones
ы¥¡вб
Call progress tones are audio signals heard through the handset or telephone ringer.
Tones signal you about the progress of certain features.
To cancel tones, press
ы£¡вб.
Note: Tones must be OFF when ATA 2 is used with a data communication device
such as a FAX or modem.