Netopia 4752 User Manual
Page 108
10-26 Administration Guide
1.
Select Profile Name and enter a name for this connection profile. It can be any name you wish. For
example: the name of your ISP.
2.
Toggle the Profile Enabled value to Yes or No. The default is Yes.
3.
Select IP Profile Parameters and press Return. The IP Profile Parameters screen appears.
4.
Toggle or enter any IP parameters you require and return to the Add Connection Profile screen by pressing
Escape. For more information on NAT, see
“Multiple Network Address Translation,” beginning on
. For more information on IP addressing, see
Appendix C, “Understanding IP Addressing.”
The Local WAN IP Address is displayed for numbered or NAT profiles. The Local WAN IP Mask is displayed
for numbered profiles. The Remote IP Address and Remote IP Mask are displayed for unnumbered profiles.
IP Profile Parameters
Address Translation Enabled: Yes
IP Addressing... Numbered
NAT Map List... Easy-PAT List
NAT Server List... Easy-Servers
Local WAN IP Address: 0.0.0.0
Local WAN IP Mask: 0.0.0.0
Remote IP Address: 0.0.0.0
Remote IP Mask: 0.0.0.0
Filter Set...
Remove Filter Set
RIP Profile Options...
Configure IP requirements for a remote network connection here.