Netopia 4752 User Manual
Page 133
Multiple Network Address Translation 11-23
■
Select NAT Map List and press Return. A pop-up menu displays a list of your defined map lists.
■
Select the map list you want to bind to this Connection Profile and press Return. The map list you selected
will now be bound to this Connection Profile.
■
Select NAT Server List and press Return. A pop-up menu displays a list of your defined ser ver lists.
■
Select the ser ver list you want to bind to this Connection Profile and press Return. The ser ver list you
selected will now be bound to this Connection Profile.
Note: There is no interdependency between NAT and IP Addressing. Also, the Local WAN IP Address and Mask
fields’ visibility are dependent only on the IP Addressing type.
IP Profile Parameters
+--NAT Map List Name---+
+----------------------+
Address Trans| Easy-PAT |s
IP Addressing| my_map |mbered
| <<None>> |
NAT Map List.| |sy PAT
NAT Server Li| |
| |
Local WAN IP | |
| |
Remote IP Add| |7.0.0.2
Remote IP Mas| |5.255.255.255
| |
Filter Set...| |tBIOS Filter
Remove Filter| |
| |
Receive RIP: | |th
| |
+----------------------+
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.
IP Profile Parameters
+-NAT Server List Name-+
+----------------------+
Address Trans| Easy-Servers |s
IP Addressing| my_servers |mbered
| <<None>> |
NAT Map List.| |sy PAT
NAT Server Li| |
| |
Local WAN IP | |0.0.0
Local WAN IP | |0.0.0
Remote IP Add| |7.0.0.2
Remote IP Mas| |5.255.255.255
| |
Filter Set...| |tBIOS Filter
Remove Filter| |
| |
Receive RIP: | |th
| |
+----------------------+
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.