Netopia 4752 - Manual (Page 46)

7-6 Administration Guide
The Operation Mode selection will reset a number of default values that per tain to that par ticular DSLAM.
If the changes are such that the defaults completely change the configuration, you will see an aler t
message asking you to confirm the resetting of the defaults.
■ If you are using the HDLC (Copper Mountain) Operation Mode, you need only specify your data link
encapsulation method.
■ Select Data Link Encapsulation and from the pop-up menu, choose Frame Relay (the default), PPP, or
RFC1483 (or possibly PPPoE).
SDSL Line Configuration
+--------------------------+
+--------------------------+
Operation Mode... | Generic |
+-----------------------------------------------------------+
D+-----------------------------------------------------------+
| Reset to default settings for this DSLAM? |
D| |
P| |
| NO YES |
+-----------------------------------------------------------+
+--------------------------+
Data Circuit VPI (0-255): 0
Data Circuit VCI (0-65535): 38
PREVIOUS SCREEN NEXT SCREEN
SDSL Line Configuration
Operation Mode... HDLC (Copper Mountain)
Data Link Encapsulation... Frame Relay
PREVIOUS SCREEN NEXT SCREEN
Return/Enter goes to new screen.
Enter Information supplied to you by your telephone company.