Netopia 4752 - Manual (Page 67)

WAN and System Configuration 9-9
A A A Ad d d dd d d diiiin n n ng g g g aa a a cccciiiirrrrccccu u u uiiiitttt
Choosing Add Circuit displays the Add Circuit screen.
The fields in the Add Circuit screen are the similar to the fields in the Change Circuit screen described above.
You can add up to seven circuits (for a total of eight) and bind them to separate Connection Profiles.
■ Use Connection Profile and Use Default Profile for Circuit allow you to choose the profile that you want to
associate with that circuit. Choosing Use Connection Profile presents a pop-up menu that lists all of your
enabled Connection Profiles. Choosing a profile from the list statically binds the circuit to the selected
profile. Choosing Use Default Profile for Circuit statically binds the circuit to the Default Profile. When the
circuit is bound to a Connection Profile, Use Connection Profile displays the name of the profile; when the
circuit is associated with the Default Profile, Use Connection Profile displays Default Profile.
When more than one circuit is enabled, you must explicitly statically bind each circuit to the Connection
Profile to be used on the circuit, or to the Default Profile. To do this you use Use Connection Profile or Use
Default Profile for Circuit.
Add Circuit
Circuit Name: Circuit 3
Circuit Enabled: +---------+
+---------+
Traffic Type... | Voice |
| Data |
Circuit VPI (0-255): +---------+
Circuit VCI (0-65535): 0
Use Connection Profile... Default Profile
Use Default Profile for Circuit
ADD Circuit NOW CANCEL