Netopia 4752 - Manual (Page 47)

Easy Setup 7-7
If you are using an ATM-based Mode, the SDSL Line Configuration screen offers additional parameters.
■ Select Data Link Encapsulation and from the pop-up menu choose either RFC1483 (the default) or PPP.
■ If you selected RFC1483, the next pop-up menu RFC1483 Mode offers the choice of Bridged 1483 or
Routed 1483. If you select Bridged 1483, a new option PPP over Ethernet (PPPoE) appears. You can
then toggle PPPoE On or Off. Choosing Routed 1483 hides the PPPoE option.
■ If you selected PPP, the next pop-up menu PPP Mode offers the choice of VC Multiplexed or LLC SNAP.
■ The next two fields, Data Circuit VPI and Data Circuit VCI are editable. Enter the Vir tual Path Identifier and
Vir tual Channel Identifier values that your provider specifies. For more information on VPIs and VCIs, see
“Multiple ATM Permanent Vir tual Circuit Suppor t” on page 9-5 .
2. Press the Down arrow key until you reach NEXT SCREEN. Press Return to bring up the next screen.
SDSL Line Configuration
+------------------------+
+------------------------+
Operation Mode... | Generic |
| Lucent |
| Nokia EOC Fast |
| Nokia Fixed |
Data Link Encapsulation... | Paradyne |
RFC1483 Mode... | Nortel UE IMAS |
| HDLC (Copper Mountain) |
+------------------------+
Data Circuit VPI (0-255): 0
Data Circuit VCI (0-65535): 38
PREVIOUS SCREEN NEXT SCREEN