Nortel Networks C4030 - Manual (Page 11)

13
C 4 0 3 0 H a n d s e t S t a n d a r d 1 .0 0
Using the C4030 handset
Handset On/Off
1. Press the
0
key for 2 seconds to
switch the handset off.
2. Press any key to switch the handset
back on again.
After 2 seconds, the handset
switches on and displays the idle
menu.
Note: Use the
r
key or the
W
key to switch the set on again. If you use
other keys for this purpose, then their function is executed
immediately after the set is switched on. Example: When you press
“O” to switch the set back on again, pre-dial begins with an “O” in the
display.
It is recommended that you leave your handset on at all times.
Receiving calls
To receive calls:
Press the
j
key. The green LED
flashes signalling the call and a
f
icon displays.