Nortel Networks C4030 - Manual (Page 4)

6
C 4 0 3 0 H a n d s e t S t a n d a r d 1 . 0 0
Sensitive Electronic Environment
Operational DECT phones can influence sensitive electronic equipment, for
example, laboratory equipment or medical equipment. This influence can
appear when DECT phones operate near equipment. Do not place the DECT
phone on or within a meter of sensitive electronic equipment even in standby
mode.
Installing the Handset
Installation Location
Place the charger on a flat, even surface. Do not install any part of the DECT
phone (charger, handset and handset accessories) in the proximity of:
• Water, moisture or damp areas.
• Sources of heat direct sunlight or unventilated areas.
• Devices which generate strong magnetic fields, electrical appliances,
fluorescent lamps, computers, radios, television sets, fax and telephone
terminals.
• Areas where the handset can be covered, under-ventilated, or exposed to
liquid penetration.
• Areas where there is excessive dust, vibration, shock, or extreme temper-
ature fluctuations.
• Near obstacles, like thick walls or metallic structures.
Keep the handset and accessories out of reach of small children at all times.
Installing the Charger: Connect the power line cable to the
back of the charger and plug the AC
adapter into the mains socket outlet.
Check for small metal objects in the C4030
handset earpiece/mouthpiece before using
the handset.
Do not store or locate flammable liquids,
gases, or explosive materials in the same
compartment or vicinity as the cordless
handset, its parts, or its accessories.
N441