Nortel Networks C4030 - Manual (Page 28)

30
C 4 0 3 0 H a n d s e t S t a n d a r d 1 . 0 0
Administration
Initial Setup and Subscription
The handset can operate with up to 4 DECT systems. Before making a call
with a DECT system, subscribe the handset to the respective system. A PIN
is required for the subscription process.
Register the handset on the
DECT system: 1. Obtain a PIN from the DECT
management system.
2. Press the
m
,
2
, and
7
keys.
3. Press the
O
key to confirm.
4. Confirm the menu selection by
pressing the O
key.
5. Enter the PIN and press the
O
key.
The handset reports that the subscription procedure has successfully com-
pleted. If it fails to report a completed subscription, contact your system
administrator.
The antenna symbol in the upper right corner of the display indicates that the
handset is locked to a DECT system.
After the registration procedure, change the default identification name to a
logical name.
Entering the Identification name
Enter a description for easy
identification of the handset: 1. Press the
m
,
2
, and
7
keys.
2. Press the
O
key for confirmation.
3. Confirm the menu selection by
pressing the
O
key.
4. Enter the description of your choice
(maximum of 10 characters) and
press the
O
key.