National Instruments NI 783xR - Manual (Page 55)

Appendix A Specifications
NI 783xR User Manual A-10 ni.com
Safety
The NI 783xR is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1
• CAN/CSA-C22.2 No. 61010-1
Note Refer to the product label, or visit ni.com/certification , search by model
number or product line, and click the appropriate link in the Certification column for UL
and other safety certifications.
Electromagnetic Compatibility
Emissions................................................EN 55011 Class A at 10 m
FCC Part 15A above 1 GHz
Immunity ................................................EN 61326:1997 + A2: 2001,
Table 1
EMC/EMI ...............................................CE, C-Tick, and FCC Part 15
(Class A) compliant
Note For full EMC compliance, operate this device with shielded cabling.
CE Compliance
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety)..............73/23/EEC
Electromagnetic Compatibility
Directive (EMC) .....................................89/336/EEC
Note Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. Visit ni.com/certification , search by model
number or product line, and click the appropriate link in the Certification column to obtain
the DoC for this product.