NetComm NP7042 - Manual (Page 4)

www.netcomm.com.au Rev.1 - YML654
Page 4 NP7042 - Wireless LAN USB Adaptor
About the NetComm NP7042 - Wireless LAN USB Adaptor
The NetComm NP7042 - Wireless LAN USB Adaptor allows USB equipped host systems to
configure, connect to and establish a wireless network.
Features Include:
■
IEEE 802.11b compatibility providing wireless Ethernet connectivity at speeds of up to 11
Mbps.
■
Dynamic scaling of the connection speed between 11, 5.5, 2, and 1 Mbps to match the
wireless network conditions.
■
Wireless security with 64-bit and 128-bit WEP data encryption.
■
Support for Microsoft Windows 98, Millennium (ME) 2000, and Windows XP.
■
C-Tick compliance.
■
Multiple operating mode options for access point (infrastructure) or peer-to-peer (ad-hoc)
associations.
■
Low-power operation.
■
LED indicators provide power and network link status.
NetComm NP7042 - Wireless LAN USB Adaptor LED Descriptions
The NetComm NP7042 - Wireless LAN USB Adaptor has two LED's.
■
The PWR LED illuminates during connection or data transfer to indicate that the adaptor is
functioning and is connected to an Access Point (Infrastructure mode), or a Peer (Ad hoc
mode).
■
The LNK LED flashes when activity is detected on the wireless link.