National Instruments PXI NI PXI-8105 User Manual
Page 30
Chapter 2
Installation and Configuration
2-16
ni.com
different size modules in each slot is supported, but system performance
will be slower than using two matched modules. However, two mismatched
modules will result in better performance than using a single module.
National Instruments offers the following types of SO-DIMMs for use with
the NI PXI-8105 controller.
•
PC2-5300 512 MB, 64 MB
× 64, CL 5, 1.18 in. max
•
PC2-5300 1 GB, 128 MB
× 64, CL 5, 1.18 in. max
Note
National Instruments has tested and verified that the DDR2 SO-DIMMs we sell
work with the NI PXI-8105. We recommend you purchase your DDR2 SO-DIMM
modules from National Instruments. Other off-the-shelf DDR2 SO-DIMM modules
are not guaranteed to work properly.
Figure 2-5. Installing a DDR2 SO-DIMM in an NI PXI-8105 Controller
1
DDR2 SO-DIMM Module
2
DDR2 SO-DIMM Socket
1
2