National Instruments PXI/CompactPCI Embedded Computer NI PXI-8108 - Manual (Page 36)

Chapter 2 Installation and Configuration
NI PXI-8108 User Manual 2-22 ni.com
Chassis Configuration
Configuration of the PXI system is handled through Measurement &
Automation Explorer (MAX), included with the software pre-installed
on your controller. MAX creates the
pxisys.ini file, which defines
the layout and parameters of your PXI system.
The configuration steps for single or multiple-chassis systems are the same.
An example of a multichassis configuration is shown in Figure 2-6.
Figure 2-6. Multichassis Configuration in MAX
Basic PXI System Configuration
1. Launch MAX.
2. In the Configuration tree, click the Devices and Interfaces branch to
expand it.