N-Tron 102RAS - Manual (Page 21)

(Revised 2010-11-15) page 21 of 30
Administration – IP Configuration
The IP Configuration part of the Administration page lists the following information about the 102RAS:
IP Address
Subnet Mask
Default Gateway
Name Server
Secondary Name Server
You may change the values to apply to your network and select the update button to save the values. The
fields for “IP Address”, “Subnet Mask”, “Default Gateway” and “Name Server” are required. A
“Secondary Name Server” is optional.
Administration – SMTP Configuration
The SMTP Configuration part of the Administration page lists the following information about the 102RAS:
SMTP Server Address
SMTP Port
Administrator E-Mail
SMTP Password
From here you can setup the Mail Server by following the following steps:
1) A mail server in the “SMTP Server Address” field.
2) The E-Mail address of the Administrator in the “Administrator E-Mail” field.
3) If the SMTP Server requires a User ID, enter the ID in the “SMTP Server User ID” field.
4) If the SMTP Server requires a password, enter the password in the “SMTP Password” field.
5) If you enter a password, retype the identical password in the “Retype SMTP Password” field
6) Click on Update. At this point the 102RAS will send the Administrator an e-mail saying that the
mail server has been updated.