N-Tron 102RAS - Manual (Page 24)

(Revised 2010-11-15) page 24 of 30
Current Status - System
This page shows the Current System Status of the 102RAS and shows the following values:
Current Time
Up Time
Pending Messages
Email Status
Email To
Subject
Time Server Status
Current Time
- Indicates the present time of day.
Pending Messages - Indicates the number of e-mails sent to the administrator that have not been opened.
These can include debug log messages, mail server change notification messages.
(relating to the “SMTP Server Address” field of Administration screen).
Email To - Indicates the Administrator’s address to which e-mails should be sent.
Subject - Title of the last pending or sent e-mail.
Time Server Status - Indicates the status of the Time server which could be “Initializing”, “No Errors”, or
SNTP Error: type.
Up Time - Operation time since last reboot.
E-mail Status - Indicates whether the 102RAS e-mail transmissions, both calls and administrative
messages, are proceeding with or without errors, may be one of the following.
“No Errors”, “Bad MailServer Address”, “Mail Server Connect Failed”,
“SMTP Invalid Response”, “SMTP Client Timeout”.
Note: The 102RAS synchronizes its call time stamps to an Internet source, usually a government standards
site. It will attempt contact with the standards web site 5 times in 20 seconds. If contact fails, it will
try 5 times again 5 minutes later. If contact succeeds, the 102RAS will update its stamping time
periodically per an interval set in the Administration screen.