N-Tron 102RAS - Manual (Page 27)

(Revised 2010-11-15) page 27 of 30
If you are setting up the 102RAS to use Radius authentication, then:
1) Enter the IP address of the primary RADIUS Server in the RADIUS Server Address 1 field.
2) Enter the port number (usually port 1812) for the RADIUS Server in the top Port field.
3) Enter the IP address of the Radius Accounting server in the RADIUS Accounting Address 1 field.
4) Enter the port number (usually port 1813) for the Radius Accounting Server in the bottom Port field.
5) Enter the Secret of the Radius Server that you are communicating with. The Secret has to be
identical to the one used by your Radius Server.