Nortel Networks Passport 241-5101-200 - Manual (Page 19)

Chapter 1 Passport 8250 19
Passport 8250 Installation Guide R2.2
Passport 8250 software
You do not have to order software for the Passport 8250. The Passport 8250
comes preloaded with the operating system and the applications it needs.
Base trunking software is included with the integrated trunk/control card
(network board), and the CES software with the access modules (service
boards), so no service support is required.
You can use the Network Management System (NMS) software to manage
the Passport 8250 devices. For information on installing and configuring the
NMS software, see NTP
241-6001-110, NMS Passport 8250 Integration
Guide .
Software compatibility
Passport 8250 release 2.2 can be used with the following software:
• Passport software that is release 5.0 or higher.
• NMS software that is release 11.1 or higher.
Related documents
Documents related to the Passport 8250 are available from Passport and NMS
documentation suites.
Passport documents
See NTP 241-5101-201, Passport 8250 Command Line Interface Guide for
information on how to monitor and configure the Passport 8250 device using
the Passport 8250 command line interface (CLI).
NMS documents
See the following NMS documents for information on how to monitor and
configure the Passport 8250 device using the NMS Passport 8250 tools,
integrating the Passport 8250 device into the NMS environment, and using
backup and restore:
• NTP 241-6001-028, NMS Passport 8250 Tools Guide.
• NTP 241-6001-110, NMS Passport 8250 Integration Guide.
• NTP 241-6001-807, NMS Backup and Restore User Guide.