NETGEAR ReadyNAS 2100 - Manual (Page 51)

ReadyNAS 2100 User Manual
Managing User Access 3-3
v1.1, June 2009
generate the private home share is controlled in the Accounts/Preferences tab, and you can disable
it if you wish.
To set up the ReadyNAS 2100 for this security mode, you need the following information:
• Workgroup name
• Group names you wish to create (for example, Marketing, Sales, Engineering)
• User names you wish to create (plus e-mail addresses if you will be setting disk quotas)
• Amount of disk space you want to allocate to users and groups (optional)
To change or set a workgroup name:
1. Select the User radio button.
2. Enter the name you want to use in the Workgroup field in the User section. The name can be
the workgroup name that is already used on your Windows network.
3. Click Apply to save your changes.
Note: Private user shares are accessible only by users using CIFS (Windows), AFP
(Mac), and FTP/S protocols.