NETGEAR ReadyNAS 2100 - Manual (Page 61)

ReadyNAS 2100 User Manual
Managing User Access 3-13
v1.1, June 2009
The columns to the left of the Delete check box represent the services that are currently available.
The access icons in those columns summarize the status of the service and the access rights to the
share for each of the services. Move the mouse pointer over the access icons to view the access
settings.
The settings are as follows:
• Disabled. Access to this share is disabled.
• Read-only Access. Access to this share is read-only.
• Read/Write Access. Access to this share is read/write.
• Read Access with exceptions. Either (1) access to this share is read-only and allowed only for
specified hosts, (2) access is read-only except for one or more users or groups that are granted
read/write permission, or (3) access is disabled except for one or more users or groups that are
granted read-only privilege.
• Write Access with exceptions – Either (1) access to this share is read/write and allowed only
for specified hosts, (2) access is read/write except for one or more users or groups that are
restricted to read-only access, or (3) access is disabled except for one or more users or groups
that are granted read/write privilege.
You can click on the access icons to display the Share Options screen, where you can set the access
rules for each file protocol. Keep in mind that access options differ between protocols.
To delete a share, select the check box on the far right of the share listing and click Delete.
Setting Share Access
Access the CIFS Share Access Restrictions screen by clicking on the file system icon.
Figure 3-12