NETGEAR ReadyNAS 2100 - Manual (Page 73)

ReadyNAS 2100 User Manual
Managing User Access 3-25
v1.1, June 2009
Change the Share Access Restrictions to allow FTP access to the share according to the user
permissions you require.
Remote HTTP Access
1. Go to Services > Standard File Protocols and enable FTP.
• HTTP
– Redirect default web access to this share: Advanced configuration option allowing
hosting of user created HTTP web page on the ReadyNAS.
– Login authentication on this share: Configures the above mentioned share for whether
or not authentication is required if users are browsing to the user created web content
• HTTPS
– Port 1: This field cannot be modified; it is reserved for the ReadyNAS.
– Port 2: This field can be used to allow https connections over a port other than the
standard 443.
Figure 3-28
Note: HTTPS cannot be disabled - Frontview requires it.
Note: Changing the default https port will require enabling port forwarding of the
port you choose on the router. Refer to the port forwarding instructions
provided with your router.