Nortel Networks Instant Internet 400 Unit - Manual (Page 49)

Chapter 5 LEDs: support and diagnostic functions 49
Setting Up the BayStack Instant Internet 400 Unit
LEDs during operation
After the power-up sequence is complete, the LEDs indicate status and activity
during operation as shown in
Table 18 .
Table 18 LED status and appearance during operation
LED # Color Appearance Meaning
Power Green Solid Unit has electrical power and is turned on.
Power Green and
Amber
Solid Green and
Flashing Amber Unit is updating flash ROM. DO NOT TURN
OFF until light returns to green.
1 Green Blinking Unit is operating normally.
2 Green Solid Unit is ready to service clients.
2 Green and
Amber Solid Green and
Flashing Amber Unit is communicating with clients.
2 Amber Solid Unit is ready to run setup but cannot service
clients (normally occurs before unit has been
configured).
3-8 Green Solid Indicated interface (see Note below) is online.
3-8 Green Flashing Indicated interface (see Note below) is dialing or
attempting connection.
3-8 Green and
Amber Solid Green and
Flashing Amber Traffic is on the indicated interface.
3-8 Red Solid Indicated interface (see Note below) has failed.
Note: The “indicated interface” is the interface associated with the
LED’s number. This information is available in the main dialog box of the
iiSetup program. For more information, refer to Using the BayStack
Instant Internet Management Software Version 7.11.