National Instruments Compact FieldPoint Mounting Accessories cFP-21xx - Manual (Page 4)

Compact FieldPoint Mounting Accessories 4 ni.com
Mounting the Controller on a Panel
1. Fasten the panel-mount plate to the back of the base using a number 2 Phillips
screwdriver and the 8-32 × 5/16 in. countersunk screws shipped with the kit.
Caution If you substitute other screws for the screws shipped with the
kit, do not use screws longer than 5/16 in. to fasten the panel-mount
plate to the base.
192839A
-01
IP ADDRESS:
N114