National Instruments Compact FieldPoint Mounting Accessories cFP-21xx - Manual (Page 7)

© National Instruments Corporation 7 Compact FieldPoint Mounting Accessories
Mounting the Controller on a Desk or Table
1. Fasten the desktop mounting
bracket to the back of the
base using a number 2
Phillips screwdriver and the
8-32
× 5/16 in. panhead
screws shipped with the kit.
Caution If you substitute
other screws for the screws
shipped with the kit, do not
use screws longer than
5/16 in. to fasten the
bracket to the base.