NetComm NB2800 - Manual (Page 19)

Rev.1 - YML648 www.netcomm.com.au
NB2800 Router Page 19
1. Select “Specify an IP address” and enter “192.168.1.***” in the “IP Address” location
(where *** is a number between 2 and 254 used by the NetComm NB2800 Router to
identify each computer), and the default “Subnet Mask” “255.255.255.0”.
Note: No two computers on the same LAN can have the same IP address but they
should have the same Subnet Mask.
2. Select “Enable DNS” in the “DNS Configuration” tab and enter the “DNS IP Address”
obtained from your ISP in the “Server Search Order” location. Click “OK”.
3. Click “Gateway” tab and enter the NetComm NB2800 Router’s default gateway value
192.168.1.1 in the “New gateway” field, then click “Add” Button.Click “OK”. Restart
your computer to complete the TCP/IP installation.