NetComm NB2800 User Manual
Page 6
www.netcomm.com.au
Rev.1 - YML648
Page 6
NB2800 Router
The NetComm router will often automatically detect this IP address, but if you are having
trouble connecting then we suggest you manually enter this IP number in the circled field
shown above. You can check which Log-in IP to use in the table below.
5. Set your “User Name” and “Password” as provided by your ISP.
6. If you wish to make services available to external Internet users, even when you are not
using Internet services from inside your network, you can choose “Keep Alive”.
Alternatively for extra security you can choose “Connect on Demand”.
7. Click “Apply”. Your NetComm NB2800 Router will attempt to use your settings to connect
to your ISP. You can check the results on the “Status Monitor” page.
8. If you have a DHCP server already active on your network it is recommended that you
disable either the NetComm NB2800 Router's built in DHCP server or the existing DHCP
server. Please note that Microsoft Internet Connection Sharing is a DHCP server.
* Correct at time of printing, check with Telstra for updates.
State
Heartbeat Login Server *
NSW
61.9.192.13
QLD
61.9.208.13
VIC
61.9.128.13
SA
61.9.224.13
WA
61.9.240.13