Default settings & facts, Resetting, Power – NetComm NB2800 User Manual
Page 4: Resetting power
www.netcomm.com.au
Rev.1 - YML648
Page 4
NB2800 Router
Default Settings & Facts
The following lists the default settings of your NetComm NB2800 Router.
Router
LAN IP:
192.168.1.1
Username:
<none>
Password:
admin
Resetting
While using or installing your NetComm NB2800 Router you may need to utilise the reset
feature. There are two types of reset:
Soft
A soft reset will restart the unit and reconnect to the internet using the settings stored
previously, none of your settings are deleted. To perform a soft reset briefly press the reset
button on the back of the unit.
Hard
A hard reset will return your unit to its factory default setting, meaning that you will loose
all configurations and logs set/stored previously. To perform a hard reset, press and hold in
the reset button on the back of the unit for 10 seconds.
Power
Ensure that you only use the Power Adaptor supplied (5V DC, Center pole positive) with your
NetComm NB2800 Router.