National Instruments Interface Device NI PCI-8254R - Manual (Page 12)

NI PCI-8254R Quick Start Guide 12 ni.com
Maximum pulse rate ...............................2 MHz
Optically Isolated Inputs and Outputs
Isolated (Current Sinking) Inputs
Number of channels................................13
Input voltage range .................................0 V to 30 V
Input ON voltage .............................3.5 V to 30 V
Input OFF voltage............................0 V to 2 V
Turn-on current.......................................7.1 mA, typical
14 mA, maximum
Maximum pulse rate ...............................100 kHz
Minimum pulse detected ........................10
μs
Reverse polarity protection.....................Yes, –30 V
Isolated (Current Sourcing) Outputs
Number of channels................................4
On-state voltage range ............................5 V to 30 V, maximum
Maximum on-state voltage
drop from V .....................................1.2 V at 100 mA
Output current
5 V isopower....................................50 mA, maximum
24 V isopower..................................100 mA, maximum
30 V isopower..................................100 mA, maximum
Maximum pulse rate ...............................10 kHz (maximum load
resistance 100 k
Ω)
Minimum pulse generated ......................100
μs
Reverse polarity protection.....................Yes
IEEE 1394
Number of ports......................................2
Speed ......................................................100, 200, or 400 Mbps