Nissan voice recognition (type a) -3, Standard mode -3 – NISSAN 2009 Murano User Manual

Page 175

Advertising
background image

Black plate (183,1)

Model "NAV2-N" EDITED: 2008/ 10/ 6

All applicable NISSAN vehicles and Mur-
ano vehicles produced for Canada after
11/2008 are equipped with the type A
Voice Recognition system. The type A
Voice Recognition system operation is
explained in this section. For the type B
Voice Recognition system operation, refer
to the “NISSAN VOICE RECOGNITION
(type B)” section in this manual.

“NISSAN VOICE RECOGNITION (type
B)” (page 9-33)

Type A NISSAN Voice Recognition allows
hands-free operation of the navigation system
and other systems equipped on this vehicle, in
one of two modes, Standard Mode or Alternate
Command Mode.

In Standard Mode, you can operate Phone and
Information. The commands that are available
are always shown on the display and announced
by the system. You can complete your desired
operation by simply following the prompts given
by the system. In this mode, hands-free opera-
tion of Audio, Climate Control and Display is not
available through Voice Recognition.

For advanced operation, you can change to
Alternate Command Mode that enables the
operation of the display, audio and climate
control through Voice Recognition. When this
mode is active, an expanded list of commands
can be spoken after pushing <TALK>, and the

voice command menu prompts are turned off.
Please note that in this mode the recognition
success rate may be affected because the
number of available commands and ways of
speaking each command are increased.

For U.S. customers, Standard Mode is selected
by default. For Canadian customers, Alternate
Command Mode is the default mode. One mode
can be switched to another.

“Setting the alternate command mode”
(page 9-25)

INFO:

. To improve recognition success when Alter-

nate Command Mode is active, try using the
Command Learning Function available in
that mode.

“Voice command learning function”
(page 9-25)

Otherwise, it is recommended that Alternate
Command Mode be turned OFF and Stan-
dard Mode be used for the best recognition
performance.

. For the voice commands for the audio, air

conditioner and other systems, refer to the
vehicle Owner’s Manual. The following sec-
tions refer only to the navigation, phone and
information systems.

. When using the system in French, com-

mands and features differ from those avail-
able when using the system in English.

If you select the “Francais” key, the French
language will be displayed, so please use
the French Owner’s Manual. To obtain a
French Owner’s Manual, please refer to the
vehicle Owner’s Manual.

STANDARD MODE

The following section is applicable when Stan-
dard Mode is activated. (This mode is selected
by default for U.S. customers.)

Displaying how to operate the voice
recognition system

If you are operating the voice recognition system
for the first time or if you would like help using
the system, you can display the user guide to
assist you.

How to use voice commands:

You can confirm how to use voice commands by
accessing a simplified User Guide, which
contains basic instructions and tutorials for
several voice commands.

NISSAN VOICE RECOGNITION

(type A)

Voice recognition

9-3

Advertising
This manual is related to the following products: