NISSAN 2009 Murano - Manual (Page 89)

Black plate (91,1)
Model "NAV2-N" EDITED: 2008/ 10/ 6
3. Highlight the preferred destination Points of
Interest and push <ENTER>.
A list screen is displayed.
4. Highlight the preferred destination from the
list, and push <ENTER>.
The position of the selected location is
displayed in the preview on the right side
of the screen.
INFO:
. If the suggested route is already set, by
highlighting [Show Along Route] and
pushing <ENTER>, the system displays
only the facilities located along the
route.
. A maximum of 100 facilities can be
displayed on the list screen.
5. The selected destination is displayed at the
center of the map. Highlight [Start] after
c o n f i r m i n g t h e l o c a t i o n a n d p u s h
<ENTER>. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
If the route is already set, the selected location
becomes a waypoint.
Other settings
You can also set the destination by pushing
<ENTER> in the current location map screen
and selecting [Nearby].
SETTING A PREVIOUS DESTINATION
This allows you to set the destination to a
location that you have previously set as the
destination and have the system calculate a
route. Up to 100 previous destinations will be
automatically stored.
If the number of previous destinations exceeds
100, the oldest one will be replaced by the new
one.
Setting a destination 4-15