NISSAN 2009 Murano - Manual (Page 90)

Black plate (92,1)
Model "NAV2-N" EDITED: 2008/ 10/ 6
1. Push <DEST>.
2. Highlight [Previous Dest.] and push
<ENTER>. A list screen is displayed.
3. Highlight the preferred destination from the
list and push <ENTER>.
4. The selected destination is displayed at the
center of the map. Highlight [Start] after
confirming the location of the displayed
destination, and push <ENTER>. The
system sets the destination to the selected
location and starts calculating a route.
INFO:
Even after setting a destination, you can adjust
the location of the destination, store the route,
etc.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-24)
SETTING THE PREVIOUS STARTING
POINT
This allows you to set the destination to the
starting point of the previous route guidance and
have the system calculate a route.
1. Push <DEST>.
2. Highlight [Next Page] and push <ENTER>.
3. Highlight [Previous Starting Point] and push
<ENTER>.
4-16 Setting a destination